86-21-68867218
Room 305, Building 1, No. 100, Jinyu Road, Jinqiao, Pudong New District, Shanghai, China (Mainland)
Disc Mill BLG-DP100
It is robust design, and suite for batch or continuous fine grinding of very hard, hard-abrasive, hard-brittle, medium-hard solids and for metal-free grinding.
Work Principle
The feed material is milled by a rotated grinding disc and the other fixed disc. The moving grinding disc rotates against a fixed one and draws in the feed material. The necessary comminution effects are generated by pressure and frictional forces. The progressively arranged grinding disc meshing first subjects the sample to preliminary crushing; centrifugal force then moves it to the outer regions of the grinding discs where fine comminution takes place. The processed sample exits through the grinding gap and is collected in a receiver.
Features and advantages
The operation is simple, easy to clean
The grinding disk has long service life
A variety of material selection of grinding disc
Continuous adjustable clearance of grinding disc
Large amount of sample processing
Large size of sample feed, up to 20mm
High efficient in sample processing, can achieve small discharging granularity within short period of time
CE certified
Technical data
Application | very hard, hard-abrasive, hard-brittle, medium-hard |
Application Examples | Mining and metallurgy, ceramics industry, rocks and soils, glass industry, soil research, etc. |
Material feed size | < 20mm |
Final fineness | < 100μm |
Gap width setting | Continuous, 0.1-5mm |
Speed | 470rpm |
Drive | 3-phase 380V geared motor 50-60Hz |
Drive Power | 1.5 KW |
